Pully for the DC-motor replacement on the Emco Unimat 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by a metal pulley for the same purpose, here a 3D model, to see if it would work. I does.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
The model is inspired by a real metal part, designed to see if it would work in my setup. It does. So good, I will test some more before replacing it with the real thing. Print this with PETG, ASA, PC-Blend or similar material using lots of perimeters and high % of density fill.
This is a the original https://www.emcounimat.nl/product/15045458/nieuwe-universele-motorpoelie-geen-emco-montage-10mm-art-4672 it looks cool, so I still might buy it. The shape of the belt bed might be better for belt wear.
The screw is optional here, the part is a tight fit on the axis.
With a proper governor, the DC-motor has a wide speed range, so the middle pulley axis and reduction pulleys become optional. The motor plate is not original, so the middle pulley axis hole is replaced by a fixture for the pulley cover plate.