Pully for the DC-motor replacement on the Emco Unimat 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by a metal pulley for the same purpose, here a 3D model, to see if it would work. I does.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
The model is inspired by a real metal part, designed to see if it would work in my setup. It does. So good, I will test some more before replacing it with the real thing. Print this with PETG, ASA, PC-Blend or similar material using lots of perimeters and high % of density fill.
This is a the original https://www.emcounimat.nl/product/15045458/nieuwe-universele-motorpoelie-geen-emco-montage-10mm-art-4672 it looks cool, so I still might buy it. The shape of the belt bed might be better for belt wear.
The screw is optional here, the part is a tight fit on the axis.
With a proper governor, the DC-motor has a wide speed range, so the middle pulley axis and reduction pulleys become optional. The motor plate is not original, so the middle pulley axis hole is replaced by a fixture for the pulley cover plate.