GTech AirRam Mk 2 Wall Hanging bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gtech AirRam Hanging bracket IMPORTANT I found these work well BUT leave marks on the Gtech These are to hang a GTech…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Gtech AirRam Hanging bracket
IMPORTANT I found these work well BUT leave marks on the Gtech
These are to hang a GTech AirRam Mk2 from a wall.
3D Print long side left to right as shown in the Cura Pictures above.
Video GTech AirRam Wall Bracket Improved, I have improved than this by changing bolt holes to slots to allow for adjusted on the wall.
See it in use:- https://www.youtube.com/watch?v=8Z83cmrLjmQ&t=354s at 5 minutes and 54 seconds
.
The brackets have a part to grip under the Gtech AirRam D Shaped handle so they will not splay apart.
They are should be strong enough with 0.2 Layer Height. 2.4mm Walls and 50% infill.
Fit one the match the other side to fit.
Category: Organization