GTech AirRam Mk 2 Wall Hanging bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gtech AirRam Hanging bracket IMPORTANT I found these work well BUT leave marks on the Gtech These are to hang a GTech…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 37
- Makes
- 0
- Views
- 343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Gtech AirRam Hanging bracket
IMPORTANT I found these work well BUT leave marks on the Gtech
These are to hang a GTech AirRam Mk2 from a wall.
3D Print long side left to right as shown in the Cura Pictures above.
Video GTech AirRam Wall Bracket Improved, I have improved than this by changing bolt holes to slots to allow for adjusted on the wall.
See it in use:- https://www.youtube.com/watch?v=8Z83cmrLjmQ&t=354s at 5 minutes and 54 seconds
.
The brackets have a part to grip under the Gtech AirRam D Shaped handle so they will not splay apart.
They are should be strong enough with 0.2 Layer Height. 2.4mm Walls and 50% infill.
Fit one the match the other side to fit.
Category: Organization