Security fence support for Ikea Släkt bed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wasn't quite convinced with Ikea's press-fit security fence for their children beds, So I decided to make my own…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I wasn't quite convinced with Ikea's press-fit security fence for their children beds, So I decided to make my own fence out of MDF boards
This thing is a support that is screwed into the fence and into the inside face of the bed to support the fence.
It's designed for a 120mm high / 800mm long / 18mm thick MDF fence (the fence lines up with the outer side of the bed.
Supports are required but the supported surface is hidden after installation.
I would suggest printing with multiple perimeters and top/bottom layers to give the screws an healthy support
Category: Replacement Parts