Flamewheel Quadcopter (slightly bigger version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original design is here : https://www.thingiverse.com/thing:2221073 from https://www.thingiverse.com/syahriansyah…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
The original design is here :
https://www.thingiverse.com/thing:2221073 from https://www.thingiverse.com/syahriansyah
I didn't quite understood why 2 plates were necessary, so i made a version with only one plate, i ve added some holes for the 30.5 x 30.5 mm flight controller, and made some quick feet. Big enough to accomodate for the lipo battery below the frame.
I ve made the arms slightly longer too.
I wanted to find an easy way to balance the drone, this is why i made a hole in the center, but it's obviously a bad idea, as the battery is blocking the way (maybe this is why there's 2 plates in the original design :-) )
Print Settings
Printer Brand:
Deltaprintr
Printer:
Deltaprintr Assembled
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
20%
Filament: PLA
Category: R/C Vehicles