Flamewheel Quadcopter (slightly bigger version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original design is here : https://www.thingiverse.com/thing:2221073 from https://www.thingiverse.com/syahriansyah…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
The original design is here :
https://www.thingiverse.com/thing:2221073 from https://www.thingiverse.com/syahriansyah
I didn't quite understood why 2 plates were necessary, so i made a version with only one plate, i ve added some holes for the 30.5 x 30.5 mm flight controller, and made some quick feet. Big enough to accomodate for the lipo battery below the frame.
I ve made the arms slightly longer too.
I wanted to find an easy way to balance the drone, this is why i made a hole in the center, but it's obviously a bad idea, as the battery is blocking the way (maybe this is why there's 2 plates in the original design :-) )
Print Settings
Printer Brand:
Deltaprintr
Printer:
Deltaprintr Assembled
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
20%
Filament: PLA
Category: R/C Vehicles