photo frame for landscape photo 195x135mm with foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A photo frame inspired from https://www.thingiverse.com/thing:344307 It can accomodate a landscape photo sized 195x135…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A photo frame inspired from https://www.thingiverse.com/thing:344307
It can accomodate a landscape photo sized 195x135 mm
This design need supports (10% or slightly less), i printed it standing and only few supports were added on the top (see photo), they go away easily with a long tool inserted in the top slot.
It needs minimal infill too (10% or slightly less) to support the hanging bottom geometry.
As i had some adhesion issues, i ve started the print very slowly (10 mm/s) and then increased the speed up to 160% where normal speed is 30 or 60mm/s.
It took 10 hours for 140g of PLA.
The photo is just printed on normal paper and i ve added a transparent film over it.
Print Settings
Printer Brand:
Deltaprintr
Printer:
Deltaprintr Kit
Rafts:
No
Supports:
Yes
Resolution:
0.4
Infill:
10
Filament: No brand. PLA
Category: Decor