1 / 6
photo frame for landscape photo 195x135mm with foot — image 1
1 / 6

photo frame for landscape photo 195x135mm with foot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A photo frame inspired from https://www.thingiverse.com/thing:344307 It can accomodate a landscape photo sized 195x135…

Rating
0 / 5
Likes
7
Downloads
82
Makes
0
Views
450
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A photo frame inspired from https://www.thingiverse.com/thing:344307

It can accomodate a landscape photo sized 195x135 mm

This design need supports (10% or slightly less), i printed it standing and only few supports were added on the top (see photo), they go away easily with a long tool inserted in the top slot.

It needs minimal infill too (10% or slightly less) to support the hanging bottom geometry.

As i had some adhesion issues, i ve started the print very slowly (10 mm/s) and then increased the speed up to 160% where normal speed is 30 or 60mm/s.

It took 10 hours for 140g of PLA.

The photo is just printed on normal paper and i ve added a transparent film over it.

Print Settings

Printer Brand:

Deltaprintr

Printer:

Deltaprintr Kit

Rafts:

No

Supports:

Yes

Resolution:

0.4

Infill:

10

Filament: No brand. PLA

Category: Decor

Tags