Aquarium Level Float
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fed up of other float switch holders being a pain to print or not suitable for my setup I designed this. Holds 2…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 827
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fed up of other float switch holders being a pain to print or not suitable for my setup I designed this.
Holds 2 floats in one bracket. if high and low you could run 4 on this setup. Height is easy to adjust with one screw (printed)
In addition the glass grip is built to not need any screws and is VERY stable once connected. works on most sump thick glass but could be made to work on thicker or thinner glass if needed.
Print Settings
Printer:
Sapphire Plus
Rafts:
No
Supports:
No
Resolution:
200
Infill:
100
Filament:
eSUN PETG
Black
Category: Pets