CR-10 stand alone kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a conversion kit to make the classic cr-10 into a stand alone unit. The main focus of my kit was to reuse all…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1022
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a conversion kit to make the classic cr-10 into a stand alone unit. The main focus of my kit was to reuse all if not most of the hardware from the cr-10. I used some of the files from the Rics kit and a display mount from Detox77.
There are no instructions for this kit. If you are inexperienced with building 3d-printers, I recommend you don't do this conversion. If you do, I am not liable for your printer no longer working or your house burning down. With that out of the way here are a couple of notes.
If you are going to use this kit in an enclosure, I recommend printing in high temp materials such as petg or abs. Otherwise pla should work great. You can print a bunch of hammer nuts to lock the all brackets in, otherwise you can buy metal ones from somewhere.
Printer legs, there are 2 options. One with a cushion that you can print with TPU filament and the other without. The cushion will help reduce vibrations, which helps improve prints. there is also a thinner version to use less filament.
I included two board mounting options. One for the original melzi and another for a Azteeg Smoothieboard.
Category: 3D Printer Accessories