ITEM light GT2 Pulley groove 8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ITEM light GT2 Pulley groove 8 This GT2 Pulley was designed for a DIY laser cutter project. It easily connects one…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — NoDerivatives
ITEM light GT2 Pulley groove 8
This GT2 Pulley was designed for a DIY laser cutter project.
It easily connects one Pulleys to an ITEM profile.
The pulley can be attached to the bracket with M3 screws. A screw under the bracket is intended for fixing on the item profile.
The M3 screw have only in the third third of a thread
(+) very precise and form-fitting
(+) no twisting of the profiles
(+) high stability if the infill is increased accordingly
(-) only ITEM light profiles, otherwise all positive points will get worse
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2 mm
Infill:
min 20%
Notes:
The GT2 Pulley holder was printed in a resolution of 0.2mm to ensure the accuracy of the connection.
The infill was set to 20%, which has given a good stability, but can be increased as needed to get a higher stability.
Category: Parts