ITEM light GT2 Pulleys groove 8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ITEM light GT2 Pulleys groove 8 This GT2 Pulleys was designed for a DIY laser cutter project. It easily connects two…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
ITEM light GT2 Pulleys groove 8
This GT2 Pulleys was designed for a DIY laser cutter project.
It easily connects two Pulleys to an ITEM profile.
Two pulleys can be attached to the bracket with M3 screws. The middle screw size M4 serves to fix the holder.
The M3 screws have only in the third third of a thread
(+) very precise and form-fitting
(+) no twisting of the profiles
(+) high stability if the infill is increased accordingly
(-) only ITEM light profiles, otherwise all positive points will get worse
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2 mm
Infill:
min 20%
Notes:
The GT2 Pulley holder was printed in a resolution of 0.2mm to ensure the accuracy of the connection.
The infill was set to 20%, which has given a good stability, but can be increased as needed to get a higher stability.
Category: Parts