Another Ikea LACK ENCLOSURE (with MDF)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a enclosure for my printer. I wanted something that was easy to assemble and disassemble. This…
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 81
- Wydruki
- 2
- Wyświetlenia
- 1522
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is my take on a enclosure for my printer.
I wanted something that was easy to assemble and disassemble.
This build has support for screws and nuts to attach the walls but you
can also you 2 pair of 10mm magnets.
I have taken inspiration of several mods for the LACK ENCLOSURE.
Started with trying to edit the STL/Mesh files but didn't like so I redid all parts. https://a360.co/2IAvkou
All parts even the walls is included as STL file
The MDF I'm using is 12mm but thinner can be used with easy, just ad washer
Components not printed are:
Ikea LACK table
MDF 12mm ( or thinner)
Wood screw: 3x16 mm
Wood screw 6x80 mm
Magnets 10x3 mm
Going to add lights and extra sound absorbent on the inside.
I'll update with more photos when it's done
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
12
Filament: Clasohlson PLA Gray
Notes:
I printed with 80mm/s and 0,32 layer and worked fine.
Category: 3D Printer Accessories