Eryone Thinker Bed Cover Plate with Slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this to replace my Thinker metal cover plate so that I can access the motherboard without flipping the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this to replace my Thinker metal cover plate so that I can access the motherboard without flipping the machine and keep it from getting debris\dust on it.
Print Settings
Printer:
Eryone Thinker S
Rafts:
No
Supports:
No
Resolution:
0.25,0.1
Infill:
20
Filament:
Anycubic PLA
Blue Post-Printing =============
Roller door setup
I printed the roller door as one and in PLA, depending on your printer tolerance, you'll require to loosen the roller joint. I just use the edge of my desk. Don't recommend using PETG as it will most likely not break apart.
After you install the roller into the Right Plate from the front under side and install the handle once it is in place.Category: 3D Printer Accessories