Chromecast Remote Controller Battery Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modeled this for someone who lost their remote backer. It's 98% as close as the stock one. Its difficult to print the…
- Ocena
- 4,667 / 5
- Polubienia
- 40
- Pobrania
- 551
- Wydruki
- 2
- Wyświetlenia
- 2913
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Modeled this for someone who lost their remote backer. It's 98% as close as the stock one.
Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin print.
I did this with a .4nozzle and Cura using super settings and a raft with tree supports. Took about 3 hours and 11grams of filament.
If you have the stock back panel, I suggest using it still. Google designed it better than I did. This is purely for people who have lost it completely and have no other option.
If you're looking to color code your remotes for specific rooms, I suggest printing a skin for the remote, or just putting some scotch tape on the back with the room written on it. The simplest answer is often the best.
Enjoy!
Print Settings
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Electronics