Chromecast Remote Controller Battery Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modeled this for someone who lost their remote backer. It's 98% as close as the stock one. Its difficult to print the…
- Rating
- 4.667 / 5
- Likes
- 40
- Downloads
- 551
- Makes
- 2
- Views
- 2,913
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Modeled this for someone who lost their remote backer. It's 98% as close as the stock one.
Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin print.
I did this with a .4nozzle and Cura using super settings and a raft with tree supports. Took about 3 hours and 11grams of filament.
If you have the stock back panel, I suggest using it still. Google designed it better than I did. This is purely for people who have lost it completely and have no other option.
If you're looking to color code your remotes for specific rooms, I suggest printing a skin for the remote, or just putting some scotch tape on the back with the room written on it. The simplest answer is often the best.
Enjoy!
Print Settings
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: Electronics