Eye of Agamotto
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of the Eye of Agamotto from the MCU's Doctor Strange.
- Ocena
- 5 / 5
- Polubienia
- 284
- Pobrania
- 988
- Wydruki
- 12
- Wyświetlenia
- 6189
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
5/3/22 - I'll update the back pieces, possibly within the next 24 hours, but the front, bars, eyelids, and ferrules are all safe to get started on.
Y'all asked. And asked. And asked some more. Here are print files for an Eye of Agamotto. If you have access to a resin printer, they'll do great there. Otherwise, print with the finest resolution possible. I recommend at least .15mm layers; .1 or smaller if your machine can handle them. Dense support is necessary on the bars and eyelids, but the rest should work just fine without. No warranty is available or implied - this isn't the easiest model in the world and definitely benefits from sanding/priming/painting. Good luck!