Lid clips for the big IKEA SAMLA storage boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original was too small for my big boxes but I liked the design so I made it a little bigger.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 298
- Wydruki
- 9
- Wyświetlenia
- 1510
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The original was too small for my big boxes but I liked the design so I made it a little bigger.
The STL provided is the 'small' one, but I provided two gcode files, one with the normal/small version and one with the large version where I just changed the height of the prints. The gcode files are for 4 clips at a time because you will mostly need 4 or 8 to close a box as you want.
I have printed them both in PLA and PETG, both work fine but because of the flexibility of PETG I prefer to have them in PETG!
For the small Samla boxes you can have a look at this one: https://www.thingiverse.com/thing:2825796
Print instructions
Category: Replacement Parts Print Settings
Printer Brand: MakerBot
Printer: MakerBot Replicator Mini+
Rafts: Yes
Supports: No
Resolution: 0,20mm
Infill: 20%