K40 exhaust vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As most K40 owners know, the metal exhaust duct is too long and tends to intrude into the workspace when you want to…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
As most K40 owners know, the metal exhaust duct is too long and tends to intrude into the workspace when you want to use the entire serviceable area. I didn't want to get out the Dremel and cut a hunk of it off, so I worked this up.
You will need to print this with supports for the part touching the build plate.
I would also recommend printing this with at least a 30% infill to give it rigidity.
Enjoy!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
30%
Category: Parts