1 / 2
StellaHue - Just another European Hue dimmer backplate — zdjęcie 1
1 / 2

StellaHue - Just another European Hue dimmer backplate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My colleague Stella asked me to print this for her. She wanted a backplate for 2 hue dimmers, which had a bit of room…

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
263
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

My colleague Stella asked me to print this for her. She wanted a backplate for 2 hue dimmers, which had a bit of room in the back so she did not have touch the electric wires... Since the existing ones on thingiverse did not meet the requirements, I made it myself.

I also added the .f3d file so you can modify it to fit your needs. Please post a picture if you do... :-)

Print Settings

Printer Brand:

TEVO

Printer:

Tornado

Rafts:

Doesn't Matter

Supports:

Yes

Infill:

15%

Filament:

Some random cheap stuff PLA

White


Notes:

I printed with support, but if I need to print it again, I will go for the "only on platform" support. It's kind of nasty to remove the support from the thingy holes, and those will probably print well enough without support.

How I Designed This

I'm pretty much a noob when it comes to designing. Comments on how I could have done this better are much appreciated. :-)

Category: Decor

Tagi