Duplicator i3 Plus X & Y Belt Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The engineer in me wanted something, well more engineered for a belt tensioner...something that pulled along the belt…
- Ocena
- 3 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 303
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The engineer in me wanted something, well more engineered for a belt tensioner...something that pulled along the belt axis and was in double shear. With that goal I designed both an X and Y tensioner for my Duplicator i3 Plus. Hardware required is listed below and adjustment is meant to be done with a ball end hex.
Adjuster Bolt for Both:
- Button head Hex M3x16mm, Two M3 washers and one M3 nylock nut
X-Axis Fastners
- Belt Pins: Two M4x16mm (if you want to use a nylock nut then use an M4x18mm)
- Mounting Bolts: Two M4x12mm
Y-Axis Fastners
- Belt Pins: Two M4x16mm (if you want to use a nylock nut then use an M4x18mm)
- Mounting Bolt: Use existing M5x18mm
Print Settings
Printer Brand:
PowerSpec
Printer:
Duplicator I3 PLUS
Rafts:
No
Resolution:
0.3
Infill:
80
Filament:
Polymaker PETG
Notes:
X-Axis tension needs support, none for the Y-Axis
Category: 3D Printer Parts