Duplicator i3 Plus X & Y Belt Tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The engineer in me wanted something, well more engineered for a belt tensioner...something that pulled along the belt…
- Rating
- 3 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 1
- Views
- 303
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The engineer in me wanted something, well more engineered for a belt tensioner...something that pulled along the belt axis and was in double shear. With that goal I designed both an X and Y tensioner for my Duplicator i3 Plus. Hardware required is listed below and adjustment is meant to be done with a ball end hex.
Adjuster Bolt for Both:
- Button head Hex M3x16mm, Two M3 washers and one M3 nylock nut
X-Axis Fastners
- Belt Pins: Two M4x16mm (if you want to use a nylock nut then use an M4x18mm)
- Mounting Bolts: Two M4x12mm
Y-Axis Fastners
- Belt Pins: Two M4x16mm (if you want to use a nylock nut then use an M4x18mm)
- Mounting Bolt: Use existing M5x18mm
Print Settings
Printer Brand:
PowerSpec
Printer:
Duplicator I3 PLUS
Rafts:
No
Resolution:
0.3
Infill:
80
Filament:
Polymaker PETG
Notes:
X-Axis tension needs support, none for the Y-Axis
Category: 3D Printer Parts