1 / 5
GepRC MX3 Sparrow Top Cover ( now with linear antenna mount) — zdjęcie 1
1 / 5

GepRC MX3 Sparrow Top Cover ( now with linear antenna mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A top cover I made to check the fit of my drawing files while I working on some other ideas for the GepRC MX3 Sparrow…

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
144
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

A top cover I made to check the fit of my drawing files while I working on some other ideas for the GepRC MX3 Sparrow Frame.

Makes a neat way to close the top of the frame and give your stack a little bit more protection. Sits nice and flush with the curve of the alloy frames. I left a cutout for the strap to go through the holes in the frame so you can still mount a camera on the top with a velcro strap if need.

My first print sample in PETG fitted neatly over the existing standoffs after cleaning up the holes a little.Tolerances are pretty precise so if you use other filaments it may not fit as well.

Update: Added new version with a hole and support for a linear antenna to go through. You will probably need to print the new version with support.

Print Settings

Printer:

Turnigy Mini Fabrikator Mk2

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

30%


Notes:

Printed in PETG
Flip the .stl file on its edge and print. Fusion 360 seems to like putting the parts on their end. My first print sample in PETG fitted neatly over the existing standoffs after cleaning up the holes a little.

Category: R/C Vehicles

Tagi