Eggbeater Drill Version 2 - Fully Printed - No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eggbeater Drill - fully 3d printed - no supports. Assembly instruction video here: https://youtu.be/LRMtJGYOVTI
- Ocena
- 0 / 5
- Polubienia
- 57
- Pobrania
- 261
- Wydruki
- 1
- Wyświetlenia
- 1124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Eggbeater Drill - fully 3d printed - no supports. Assembly instruction video here: https://youtu.be/LRMtJGYOVTI
Just a demo of it in action here:
This new version has an added idler gear, which allows for a bit more torque than the previous version.
Spindle Chuck part, and the crankshaft should be printed with several perimeters and at or near 100% infill for strength, all the other parts can be made with just a few perimeters and 15% infill.
The gears should be printed with 0.2mm layer height. Everything else is fine with 0.3mm
Pictured example was printed in PETG.
Category: Hand Tools
Original version without the idler gear:
https://www.printables.com/model/129331-eggbeater-drill-fully-printed-no-supports