Flex Shaft Bench Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to hold the business end of a Foredom tool to free both hands for the work. The base is reinforced on one…
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 761
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Designed to hold the business end of a Foredom tool to free both hands for the work. The base is reinforced on one edge and one end so it can be clamped to a workbench. Extra holes are provided so the pedestal can be rotated 90 degrees. All holes should be tapped M5. Use an M5 x 25mm bolt in the center hole with washers to spread the load. This is long enough that a nut can be used to attach the pedestal securely. The outer two bolts should also be attached with washers; 15mm bolts are plenty long enough.
The top clamp can be attached with M5 x 15mm bolts. On top of the clamp use an M5 x 10mm bolt togently secure the handpiece.
--If you can't afford a Foredom there's a good knockoff available here: https://www.sciplus.com/variable-speed-flex-shaft-grinder-43486-p
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
50%
Filament: 3D Solutech TPU Any
Notes:
Print base upside down and no support will be needed.
Category: Hobby