Flex Shaft Bench Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to hold the business end of a Foredom tool to free both hands for the work. The base is reinforced on one…
- Rating
- 0 / 5
- Likes
- 65
- Downloads
- 160
- Makes
- 0
- Views
- 761
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Designed to hold the business end of a Foredom tool to free both hands for the work. The base is reinforced on one edge and one end so it can be clamped to a workbench. Extra holes are provided so the pedestal can be rotated 90 degrees. All holes should be tapped M5. Use an M5 x 25mm bolt in the center hole with washers to spread the load. This is long enough that a nut can be used to attach the pedestal securely. The outer two bolts should also be attached with washers; 15mm bolts are plenty long enough.
The top clamp can be attached with M5 x 15mm bolts. On top of the clamp use an M5 x 10mm bolt togently secure the handpiece.
--If you can't afford a Foredom there's a good knockoff available here: https://www.sciplus.com/variable-speed-flex-shaft-grinder-43486-p
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
50%
Filament: 3D Solutech TPU Any
Notes:
Print base upside down and no support will be needed.
Category: Hobby