Triangulated Flower Pot / Planter Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of "Triangulated Flower Pot" by Bluebie (thingiverse.com/thing:266392). The triangulated parts were switched and…
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 147
- Wydruki
- 2
- Wyświetlenia
- 819
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of "Triangulated Flower Pot" by Bluebie (thingiverse.com/thing:266392). The triangulated parts were switched and mirrored to create a set of flower pots.
The uploaded things are designed solid. One can adjust the wall thickness to the desired value using his slicer software. Use "Spiralize Outer Contour" (vase mode, best results) or modify the wall line count, set top layer thickness to 0 mm and set infill to 0 %. The bottom thickness is recommended to be at least 1 mm.
Advantage: Wall and bottom thickness are easy adjustable. No travel moves or combing across the print or the shell/skin is needed. The result is a fast printable and more consistent plant pot with less defects.
----Best results Cura settings, Spiralize Outer Contour: On----
----Top/Bottom----
Top Thickness: 0 mm
Bottom Thickness: at least 1 mm
----Special Modes----
Spiralize Outer Contour: On
----Alternative Cura settings, Spiralize Outer Contour: Off----
---- Walls----
Wall line count: 3 or higher recommended for 0.4 mm nozzle
----Top/Bottom----
Top thickness: 0 mm
Bottom thickness: at least 1 mm
---- Infill ----
Infill density: 0 %
Supports: No
Resolution: 0.2
Filament: PETG White
Category: Outdoor & Garden