1 Inch Molding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 1" piece of circular cutaway molding for finishing a wall. The trim is approximately 10.6" long, and has mounting holes for a #1 wire brad.
For additional dimensions see the attached picture. NOTE: Those dimensions are in milimeters.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30
Filament:
eSun PLA
Notes:
I would not suggest printing this part in PETG as having paint stick to PETG would be difficult.
I would use PLA or ABS.Post-Printing
1.) Optional - Spray with automotive filler primer, sand when dry.
2.) Cut part to length
3.) Using No. 1 brads nail molding into wall using corresponding thru holes located on the part.
4.)Paint
How I Designed This
Solidworks.
Please reach out for native, or STEP file formats.
Category: Decor