1 / 5
Manifold Style Boot Dryer — zdjęcie 1
1 / 5

Manifold Style Boot Dryer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Revision Block April 17, 2017 - Initial Release April 19, 2017 - Updated fastening locations to be in the main housing…

Ocena
0 / 5
Polubienia
6
Pobrania
20
Wydruki
0
Wyświetlenia
427
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Revision Block

April 17, 2017 - Initial Release

April 19, 2017 - Updated fastening locations to be in the main housing to reduce part footprint and reduce material consumption. Added STEP assembly to attached files.

Description

This is designed as a boot dryer to utilize 40mm equipment fans, which can typically be powered with 5VDC (USB), and would utilize 1" diameter corrugated hose.

I should be including updates to this design, and let me know about any feedback on improvements!

Bill of Materials

3D printed Manifold

3D printed Main Body

3D Printed Fan Plate

2X 40mm PC fan - https://www.mcmaster.com/#1939k17/=178usm8

8x M4X20mm screws - https://www.mcmaster.com/#91290a168/=178uth8

8X M4 Nuts - https://www.mcmaster.com/#90591a255/=178utwi

8X M4 Plastic thread forming Screws - https://www.mcmaster.com/#96817a522/=178uu8c

4X Plastic Zip Ties (for holding the corrugated tubing on the manifold)

1 inch inner diameter flexible tubing - https://www.mcmaster.com/#5393k46/=178uvvd

Category: Outdoor & Garden

Tagi