Manifold Style Boot Dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Revision Block April 17, 2017 - Initial Release April 19, 2017 - Updated fastening locations to be in the main housing…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 427
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Revision Block
April 17, 2017 - Initial Release
April 19, 2017 - Updated fastening locations to be in the main housing to reduce part footprint and reduce material consumption. Added STEP assembly to attached files.
Description
This is designed as a boot dryer to utilize 40mm equipment fans, which can typically be powered with 5VDC (USB), and would utilize 1" diameter corrugated hose.
I should be including updates to this design, and let me know about any feedback on improvements!
Bill of Materials
3D printed Manifold
3D printed Main Body
3D Printed Fan Plate
2X 40mm PC fan - https://www.mcmaster.com/#1939k17/=178usm8
8x M4X20mm screws - https://www.mcmaster.com/#91290a168/=178uth8
8X M4 Nuts - https://www.mcmaster.com/#90591a255/=178utwi
8X M4 Plastic thread forming Screws - https://www.mcmaster.com/#96817a522/=178uu8c
4X Plastic Zip Ties (for holding the corrugated tubing on the manifold)
1 inch inner diameter flexible tubing - https://www.mcmaster.com/#5393k46/=178uvvd
Category: Outdoor & Garden