463mm MLOK Hex Handguard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Barrel nut threads directly to upper receiver. Handguard threads into barrel nut and is held together with two or…
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 1707
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Barrel nut threads directly to upper receiver. Handguard threads into barrel nut and is held together with two or three M3x0.5x12 screws. You can slice the model to a shorter size if you want. Just sand and superglue the edges to put them together.
Depending on your print settings this will take about 22 hours at 0.2mm layer height and 200g (PLA filament).
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
10%
Filament: Zyltech PLA White
Notes:
Print with high shell count (4 or 5) and low infill for a solid build. Use your slicer to cut the model and fit it to your print bed. I recommend printing with a brim for the supports needed on the Barrel Nut. You can print without supports but it'll make the overhangs really ugly.
Category: Sport & Outdoors