1 / 5
New Bright Toy RC to 12mm Hex Wheel Adapter — zdjęcie 1
1 / 5

New Bright Toy RC to 12mm Hex Wheel Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I wanted to use some hobby grade tires on a cheap RC toy from the thrift store, so I whipped up these adapters. This…

Ocena
0 / 5
Polubienia
13
Pobrania
131
Wydruki
0
Wyświetlenia
764
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I wanted to use some hobby grade tires on a cheap RC toy from the thrift store, so I whipped up these adapters. This allows you to mount RC wheels with a 12 mm hexagon onto the New Bright truck chassis.

The Truck Chassis I used was the Liberator RAT Racer. It is a two wheel drive chassis, so the front wheels rotate around a 1/4" shaft and the drive wheels in the rear go over a 7 mm hexagon inside a 11 mm opening.

The "Short" versions use the 1/2" and 1" screws that come with the vehicle and the normal version are 12.5 mm (1/2 inch) longer. The screws that come with the vehicle look like #4 sheet metal screws, but you can use a #6 sheet metal screw if you cannot locate a #4 that is long enough. I was able to buy small packs at Home Depot.

Print Settings

Notes:

I printed the Rear Wheel Adapter with the Hexagon down, used tree supports in Cura.

The Front adapter was printed Hexagon up.

Post-Printing

I had to file back a little elephant's foot on the hexagon for the Rear Wheel Adapter, but other than that they went on with no issues.

How I Designed This

Thrown together in Tinkercad. Here are the links to copy and edit them in Tinkercad, since I have not learned how to do this as a parametric design, yet.

https://www.tinkercad.com/things/iceeLHG6eMZ-rear-wheel-adapter

https://www.tinkercad.com/things/87H5MV3j1Pp-front-wheel-adapter

Category: R/C Vehicles

Tagi