Mendel90 adapter for herringbone gears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really wanted to be able to use Triffidhunter's parametric herringbone gears (…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I really wanted to be able to use Triffidhunter's parametric herringbone gears ( http://www.thingiverse.com/thing:10707 ) as recommended by Richrap, but they were just too tall to fit on my X-carriage.
This adapter will raise the Wade's block by 2 mm which is just enough to allow the large gear to fit.
Read more at http://mynext3dprinter.tumblr.com
Instructions
Print the adapter and the herringbone gears.
I had to trim my prototype to clear the X belt. The modified STL file should fit perfectly.
Replace the old gears in the Mendel90 with shiny new ones.
Don't forget to recalibrate your Z-height and E steps/mm.
Category: 3D Printer Extruders