1 / 2
Chinstrap Connector for Quest 2 Elite Battery Strap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple build that adds connection points for a chinstrap to the *Quest 2 Elite Battery Strap.*
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I got tired of the Q2 being so front heavy, even with a 10AH battery as a count weight, so I ordered a hard-hat chinstrap from Amazon and made a new plate for my battery mounting clips to attach it.
- If you want just the chinstrap functionality, you will need 2 M6x1 - 10mm screws. I use clear plastic ones from the internet.
- If you also want the battery holder functionality, you will need 4 M6x1 - 10mm and 2 M6x1 - 15mm screws.
For best results I do the following:
- Use at least 3 shells
- Use 0.2mm layer height to get good screw threads
- Run an M6x1 tap through the threaded parts
- Run an M6x1 die over the battery screw
Here is my original battery holder: Extra Battery/Counterweight Mount for Quest 2 Battery Strap by Jorg | Download free STL model | Printables.com