1 / 2
Chinstrap Connector for Quest 2 Elite Battery Strap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple build that adds connection points for a chinstrap to the *Quest 2 Elite Battery Strap.*
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 627
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
I got tired of the Q2 being so front heavy, even with a 10AH battery as a count weight, so I ordered a hard-hat chinstrap from Amazon and made a new plate for my battery mounting clips to attach it.
- If you want just the chinstrap functionality, you will need 2 M6x1 - 10mm screws. I use clear plastic ones from the internet.
- If you also want the battery holder functionality, you will need 4 M6x1 - 10mm and 2 M6x1 - 15mm screws.
For best results I do the following:
- Use at least 3 shells
- Use 0.2mm layer height to get good screw threads
- Run an M6x1 tap through the threaded parts
- Run an M6x1 die over the battery screw
Here is my original battery holder: Extra Battery/Counterweight Mount for Quest 2 Battery Strap by Jorg | Download free STL model | Printables.com