NEMA (extruder) motor rotation indicator Manx Triskelion (Prusa i3 MK2/MK2S/MK3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked Petclaud's visualisers, so I thought I'd have a go at making one of my own: this is the result.…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I really liked Petclaud's visualisers, so I thought I'd have a go at making one of my own: this is the result. Designed to have an 8x3mm magnet on the back (the keen-eyed will notice I'm using blu-tack when I took the photograph, need to find my superglue...) Now I just need Jo Prusa to have Prusa Orange PLA back in stock.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
NA
Notes:
Don't worry/bother about infill, it's too small for that to be a thing. If it imports not flat to the bed, rotate it positive 90 degrees about the X axis to have it print correctly.
How I Designed This
Took an SVG of the triskelion (thanks Wikipedia), imported it into Fusion 360 and then extruded it (basically...) This particular version (v2) I took the time to make it print the right way round and made sure the "dots" behind the heels are attached to the heels equally all round.
Category: 3D Printer Accessories