Miata Advanti Center Cap - Old Mazda Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a printed center cap insert to replace the one that comes with the Advanti rims commonly put on MX-5's (miata).
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I decided I didn't like the center cap that comes with the Advanti Storm S1's I bought for my Miata. So I set out to print something more fun. This one features one of the older logo's Mazda used.
The g-code file that is ready for printing is set to do two colors, so you can print the background in something contrasting if you want.
I printed mine out of ASA but have not actually had them on the car yet to see how long or how well they hold up. I used a thin double sided tape to attach them similar to how the factory ones attach.