FeeYoung - FatShark 600TVL Rotating Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows you to mount the FatShark TVL600 (or similar) FPV camera so it can be rotated by a servo on the FeeYoung…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This allows you to mount the FatShark TVL600 (or similar) FPV camera so it can be rotated by a servo on the FeeYoung ZX-250 quad frame. The flange is printed 0.2mm wider with a 0.5mm support. Once printed and cooled, you have to twist the flange to break it free. A few twists back-and-forth will loosen it up so it can act as a bearing. The right side flange is printed flat and can be slid on after the print is complete. More cools stuff @ Plastibots (http://www.plastibots.com/index.php/2016/03/19/feeyoung-fatshark-600tvl-rotating-camera-mount/)
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1sA2hfcwcNF
Category: 3D Printing