FeeYoung - FatShark 600TVL Rotating Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows you to mount the FatShark TVL600 (or similar) FPV camera so it can be rotated by a servo on the FeeYoung…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
This allows you to mount the FatShark TVL600 (or similar) FPV camera so it can be rotated by a servo on the FeeYoung ZX-250 quad frame. The flange is printed 0.2mm wider with a 0.5mm support. Once printed and cooled, you have to twist the flange to break it free. A few twists back-and-forth will loosen it up so it can act as a bearing. The right side flange is printed flat and can be slid on after the print is complete. More cools stuff @ Plastibots (http://www.plastibots.com/index.php/2016/03/19/feeyoung-fatshark-600tvl-rotating-camera-mount/)
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1sA2hfcwcNF
Category: 3D Printing