1 / 5
Ford F-150 Lid Latch for center console armrest 2010-2015 — zdjęcie 1
1 / 5

Ford F-150 Lid Latch for center console armrest 2010-2015

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I broke my original latch on my 2012 F-150. I remixed this and made the pins braces a little narrower to make it…

Ocena
0 / 5
Polubienia
9
Pobrania
122
Wydruki
0
Wyświetlenia
723
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

I broke my original latch on my 2012 F-150. I remixed this and made the pins braces a little narrower to make it easier to put in i also removed the 3d printed spring part and reinforced the pins instead this was still a very tight fit you might need to still sand the pins down shorter. might modify more if it breaks in future. A paper clip spring will work but If you have original spring, use that instead. attached is a youtube of how to install the latch i do not own this video.

Print Settings

Printer:

Turnigy Fabrikator

Rafts:

Yes

Supports:

Yes

Resolution:

.2m

Infill:

75%


Notes:

slice the print so the pins and latch are flat on the glass with supports touching build plate

Post-Printing =============

print laying flat like this and make sure you have supports touching build plate lot of overhang in the latch part

Category: Automotive

Tagi