Ford F-150 Lid Latch for center console armrest 2010-2015
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I broke my original latch on my 2012 F-150. I remixed this and made the pins braces a little narrower to make it…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 122
- Makes
- 0
- Views
- 723
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I broke my original latch on my 2012 F-150. I remixed this and made the pins braces a little narrower to make it easier to put in i also removed the 3d printed spring part and reinforced the pins instead this was still a very tight fit you might need to still sand the pins down shorter. might modify more if it breaks in future. A paper clip spring will work but If you have original spring, use that instead. attached is a youtube of how to install the latch i do not own this video.
Print Settings
Printer:
Turnigy Fabrikator
Rafts:
Yes
Supports:
Yes
Resolution:
.2m
Infill:
75%
Notes:
slice the print so the pins and latch are flat on the glass with supports touching build plate
print laying flat like this and make sure you have supports touching build plate lot of overhang in the latch part


Category: Automotive
