1 / 6
Outdoor Enclosure for Plantower PMS5003 / WeMos D1 Mini — zdjęcie 1
1 / 6

Outdoor Enclosure for Plantower PMS5003 / WeMos D1 Mini

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of rainbow_wheez3's outdoor enclosure for the Plantower PMS5003 Particle Matter Sensor…

Ocena
0 / 5
Polubienia
3
Pobrania
34
Wydruki
0
Wyświetlenia
903
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Remix of rainbow_wheez3's outdoor enclosure for the Plantower PMS5003 Particle Matter Sensor

https://www.thingiverse.com/thing:4581351

I wanted a bit more wiggle room for the WeMos D1 Mini control board and cables. This is part of my weather station so I had a few more cables that needed routing and it made sense to just stretch out the model a bit.

On the final setup I added a little roof for more protection and aesthetics, using some spare window blind strips that I just cut and glued on.

The weather station includes a BME280/BMP280 in a Stevenson Screen housing using this model -

https://www.thingiverse.com/thing:873879

Print Settings

Printer Brand:

FlashForge

Printer:

Creator Pro

Rafts:

No

Supports:

Yes

Resolution:

0.3

Infill:

30%

Filament: Hatchbox PLA Black

Category: Hobby

Tagi