Hero Me Gen5 Titan Direct Extruder mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hero Me Gen5 is a great suite, yet since I have started using Titan extruder in direct drive configuration , adapter…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Hero Me Gen5 is a great suite, yet since I have started using Titan extruder in direct drive configuration , adapter for mounting it was missing. So I have designed one to work with stock Ender 3 hot end and X carriage - Hero_Me_Gen5_Base_4.stl adapter.
Design is based on: https://www.thingiverse.com/thing:4460970, and: https://www.thingiverse.com/thing:3369418 - an excellent collection of mounts.
Mount face offset was adjusted, after testing the hole plate required biffing to hold the loads from extrusion and retractions.
Destination material was PET-G, yet I had Fiberology Impact PLA on hand - the material with higher stiffness.
I have used ironing and 2mm Z fade height for keeping mount surfaces as parallel as possible. Use XY compensation or hole size compensation to get tight press fit on rollers bushings.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.25
Infill:
20-25%
Filament: Fiberology Impact PLA Gray
Category: 3D Printer Extruders