Hero Me Gen5 Titan Direct Extruder mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hero Me Gen5 is a great suite, yet since I have started using Titan extruder in direct drive configuration , adapter…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 494
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Hero Me Gen5 is a great suite, yet since I have started using Titan extruder in direct drive configuration , adapter for mounting it was missing. So I have designed one to work with stock Ender 3 hot end and X carriage - Hero_Me_Gen5_Base_4.stl adapter.
Design is based on: https://www.thingiverse.com/thing:4460970, and: https://www.thingiverse.com/thing:3369418 - an excellent collection of mounts.
Mount face offset was adjusted, after testing the hole plate required biffing to hold the loads from extrusion and retractions.
Destination material was PET-G, yet I had Fiberology Impact PLA on hand - the material with higher stiffness.
I have used ironing and 2mm Z fade height for keeping mount surfaces as parallel as possible. Use XY compensation or hole size compensation to get tight press fit on rollers bushings.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.25
Infill:
20-25%
Filament: Fiberology Impact PLA Gray
Category: 3D Printer Extruders