1 / 2
40mm cooling fan adaptor for Satsana - replaces stock blower - uses stock fixings. — zdjęcie 1
1 / 2

40mm cooling fan adaptor for Satsana - replaces stock blower - uses stock fixings.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple print to allow the use of a 40mm radial fan with a Satsana cooling duct instead of the stock blower. (Eg a…

Ocena
5 / 5
Polubienia
13
Pobrania
118
Wydruki
1
Wyświetlenia
566
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple print to allow the use of a 40mm radial fan with a Satsana cooling duct instead of the stock blower. (Eg a fan that is quieter than the stock blower fan)

It uses the stock mounting screws and can be retrofitted to existing Satsana ducts/interchanged with the stock blower fan without needing to reprint the whole mount.

Make sure the 40mm fan you use can provide sufficient airflow to provide adequate cooling of parts as they print.

No supports are needed to print this if you orientate it with the completely flat side towards the bed.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.12

Infill:

20%

Filament: SUNLU PLA Black

Category: 3D Printer Parts

Tagi