1 / 3
Housing for Duet3D Laser Filament Monitor — zdjęcie 1
1 / 3

Housing for Duet3D Laser Filament Monitor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are the printed parts for the Duet3D version 1 Laser Filament Monitor described at…

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
151
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

These are the printed parts for the Duet3D version 1 Laser Filament Monitor described at https://duet3d.com/wiki/Duet3d_Filament_Monitor:_laser_version. They must be printed in black plastic. I suggest 0.2mm layer height.

You can use Customizer to adjust the height of the centre of the filament above the PCB for optimum detection by the laser. Choose a multiple of your layer height. We have not yet determined the optimum value for this, but 6mm seems to work well with 1.75mm filament.

You can also adjust the diameter of the hex clamp for the PTFE inlet and output tubes. 4.6mm is about right for 4mm OD PTFE tube.

Update: I have added a narrower version with built-in nut traps, for use on a Hemera tool on an E3D Tool Changer.

Print Settings

Printer:

Kossel XL

Rafts:

No

Supports:

No

Filament:

Any PLA or PETG

Must be black


Notes:

Layer height 0.2mm

Category: 3D Printer Accessories

Tagi