Housing for Duet3D Laser Filament Monitor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the printed parts for the Duet3D version 1 Laser Filament Monitor described at…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
These are the printed parts for the Duet3D version 1 Laser Filament Monitor described at https://duet3d.com/wiki/Duet3d_Filament_Monitor:_laser_version. They must be printed in black plastic. I suggest 0.2mm layer height.
You can use Customizer to adjust the height of the centre of the filament above the PCB for optimum detection by the laser. Choose a multiple of your layer height. We have not yet determined the optimum value for this, but 6mm seems to work well with 1.75mm filament.
You can also adjust the diameter of the hex clamp for the PTFE inlet and output tubes. 4.6mm is about right for 4mm OD PTFE tube.
Update: I have added a narrower version with built-in nut traps, for use on a Hemera tool on an E3D Tool Changer.
Print Settings
Printer:
Kossel XL
Rafts:
No
Supports:
No
Filament:
Any PLA or PETG
Must be black
Notes:
Layer height 0.2mm
Category: 3D Printer Accessories