Gravitrax Lift Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a new screw design which will fit the Gravitrax Motorized Marble Lift www.thingiverse.com/thing:4178353 and is…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 133
- Wydruki
- 5
- Wyświetlenia
- 1458
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This is a new screw design which will fit the Gravitrax Motorized Marble Lift www.thingiverse.com/thing:4178353 and is not a remix, it is a complete re-design. I kept the same pitch angle and used the taller height. I found that with the original design, the balls would not enter the lift and that the screw itself had a problem printing cleanly with the overhang all the way up. I hate using supports and so I redesigned this one to print without any. I also re-designed the inner bits so that it is easy to align and I added a conical top, once again to avoid bridging. This one prints beautifully and I really want to thank ffleurey for his wonderful work in making this thing for all of us to use. I am thrilled that I didn't have to do all of the work on the lift body as his design is brilliant!
I have remade the old style motor hub as it was pointed out to me that it has been changed to a version that no longer works with this screw. This hub is like the original or at least as close as I could get and should work with the screw. Thank you XXV for letting me know that things had changed!
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30% rectilinear combine every 2 layers
Filament:
generic petg
Notes:
Bottom layer height is .3 (or 150% at .2 layer height). No supports are needed as there are no overhangs or bridges and all angles are over 49 degrees.
Category: Toys & Games