SKADIS top shelf with border
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed a top shelf for SKADIS for a square clock. Its "shelf depth" not including the border is 66.8 cm and width…
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 258
- Wydruki
- 3
- Wyświetlenia
- 1485
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Printed a top shelf for SKADIS for a square clock.
Its "shelf depth" not including the border is 66.8 cm and width 63.2 cm (without border and slant).
After printing I've realized you don't technical need the "hook" part. so I've included a version without it. It just slides snugly on the top and is supported by the trianglular support.
If you do print it with the hook - careful not to brake it off: first put the hook in the whole, pull the whole thing up and slide it over on top.
The sample shown in the picture is smaller than the clock, but fits well enough that I did not reprint. The model included was adjusted to match the size, but I could not be bothered printing another.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15
Filament: eSun PLA+ White
Notes:
Print it on its side. Add support for the "bottom" part of the shelf.
The "remix" here is I took the bottom hook part and removed the top adding my own shelf.
I've added slants on the sides to avoid a need for support when printing on the side.
You can adjust any sized in tinekcad:
https://www.tinkercad.com/things/hwDYiFMYkwt-skadis-square-shelf-clock-holder
Category: Organization